Make your first code
- Copy your Wi-Fi network name and password into the generator.
- Choose your router’s security type. WPA is the usual choice for WPA2 and mixed WPA2/WPA3 networks.
- Keep Solid modules for the most dependable print, or try round modules or a photo.
- Download a PNG, export a solid code as SVG, or make a sign.
- Scan the actual print with a phone before putting it up.
It scans, but the phone won’t join
Check that the network name, capital letters, spaces, password, and security type match your router. Leave escaping on: punctuation such as semicolons and backslashes needs special handling inside a Wi-Fi QR code.
Choose WPA3-only (SAE) only if the router is configured that way. Some phone scanners do not support SAE. A code cannot bypass a captive portal, connect to an out-of-range network, or configure a business network that needs a username and certificate.
The “encoded details” view checks the text format. It does not test a camera or connect to your network.
Put a logo in the centre
Use Add a picture (optional) in the generator, then adjust Picture size. In Advanced options, select Centre image / logo under Style. It keeps its colours and proportions, with a clear border. Adjust Centre image size to suit your logo. High error recovery is selected automatically.
The image is included in PNG downloads and printable signs. Use Remove picture to restore a complete QR code. If scanning struggles, reduce the centre image size and test again.
The camera can’t read it
Try removing the picture, or making it smaller. For more controls, open Advanced options and choose Solid modules, black on white, and the smallest code setting. Keep the clear border around the code and make the print larger. Check for glare, blur, or a very shallow viewing angle.
Halftone pictures are available in Advanced options and need more care. Start with More picture to make your image visible, and check the adjusted-picture preview. Lower QR strength for more image detail; raise it or choose Stronger scanning if your phone struggles. Balanced uses a larger centre dot. Keep the QR code’s clear border and scan the final print: picture visibility and scanning distance are a trade-off.
Where does my password go?
The code is generated on this device. The site does not send your network details or picture to a server, use analytics, or load third-party scripts or fonts.
Only appearance preferences are remembered automatically. “Remember this network” saves its name and password in plain text in this browser profile. Use “Forget” or “Clear all remembered networks” to remove them.
Opening the sign builder from the generator briefly transfers the draft through this tab’s session storage, then removes it on arrival. No network details are put in the URL. Your downloaded code and printed sign contain the Wi-Fi password even if you hide the text.
Printing and sharing
PNG works for most layouts. SVG keeps solid codes sharp at any size. The sign page prints without the editing controls; choose “Save as PDF” in the print dialog for a shareable document. Turn off browser headers and footers for a clean sign.
Try a QR code at least 4 cm wide for a close-up scan, then test at the distance and lighting guests will use. Dense codes and photo styles may need a larger print. The code continues working without this website as long as your Wi-Fi details stay the same.
Built on good ideas
The Wi-Fi payload follows the ZXing Wi-Fi format. The simple, local-first approach is inspired by QiFi and wifiqr. The picture treatment is inspired by Halftone QR.
QR encoding uses Kazuhiko Arase’s MIT-licensed qrcode-generator, included locally. See the third-party notice.